1 0.5mm pitch, 2.5mm above the board,high speed transmission connector for shielded ffc fh41 series 2010.9 features 1. compatibility with impedance control, shield ffc the fh41 series is equipped with a gnd exclusive terminal and available for connection with impedance control, shield ffc. 2.differential impedance 100 10% the fh41 series features a terminal design considering impedance control, and making high speed transmission possible. 3.highly reliable connection, tough structure the fh41 series follows the structure of the proven fh28 series, and achieves: - high reliability thanks to the ffc positioning mechanism - reliable connection operation and no unlocking thanks to the durable structure. 4.one-finger operation of the actuator proven (in several other hirose's connectors!) flip-lock rotating actuator assures reliable mechanical and electrical connection with fpc, confirming it with a definite tactile feel. 5.board placement with automatic equipment flat upper surface and tape and reel packaging facilitate vacuum pick-up and placement. standard reel packaging contains 2,500 connectors. 6.halogen-free * * as defined by iec61249-2-21 br-900ppm maximum, cl-900ppm maximum, cl + br combined-1,500ppm maximum ?high-speed serial interface technology yfor image transmission thine electronics, inc. next-generation chipset (v-by-one ? hs*) compatible connector 2.5mm 6.2mm 38mm signal contact connection area gnd contact connection area ' ' $ space saving (68 pos. shown) signal contact 0.5mm pitch ground contact 2.5mm pitch figure.1 figure.2 figure.3 t h e p r o d u c t i n f o r m a t i o n i n t h i s c a t a l o g i s f o r r e f e r e n c e o n l y . p l e a s e r e q u e s t t h e e n g i n e e r i n g d r a w i n g f o r t h e m o s t c u r r e n t a n d a c c u r a t e d e s i g n i n f o r m a t i o n .
2 fh41 series 0.5mm pitch, 2.5mm above the board,high speed transmission connector for shielded ffc specifications ratings current rating 0.5 a(note1) voltage rating 50 vrms ac o perating temperature range: -40 to +85c (note 2) o perating humidity range: relative humidity 90% max. (no condensation) s torage temperature range: -10 to +50c (note 3) s torage humidity range: relative humidity 90% max. (no condensation) recommended fpc thickness 0.3 0.05 mm, gold plated contact pads (gnd plate:t=0.50.05mm, tinplateing) item specifcation conditions 1. insulation resistance 500 m? min. 100 v dc 2.withstanding voltage no fashover or insulation breakdown 150 vrms ac / one minute 3.contact resistance 100 m? max. * including ffc conductor resistance 1 ma, ac max (ac: 1khz) 4.durability contact resistance: 100 m? max. no damage, cracks, or parts dislocation 20 cycles 5.vibration no electrical discontinuity of 1s or longer contact resistance: 100 m? max. no damage, cracks, or parts dislocation frequency: 10 to 55 hz, single amplitude of 0.75mm, 10 cycles in each of the 3 directions 6.shock no electrical discontinuity of 1s or longer contact resistance: 100 m ? max. no damage, cracks, or parts dislocation acceleration of 981m/s 2 6 ms duration, sine halfwave, 3 cycles in each of the 3 axis 7.humidity (steady state) contact resistance: 100 m ? max. insulation resistance: 50 m ? min. no damage, cracks, or parts dislocation 96 hours at 40c and humidity of 90 to 95% 8.temperature cycle contact resistance: 100 m? max. insulation resistance: 50 m? min. no damage, cracks, or parts dislocation temperature : -40c +15c to +35c +85c +15c to +35c time: 30 2 to 3 30 2 to 3 minutes 5 cycles 9. resistance to soldering heat no deformation of components affecting performance refow: at the recommended temperature profle manual soldering: 350c 5c for 5 seconds note 1. when passing the current through all of the contacts, use 70% of the rated current. note 2. includes temperature rise caused by current fow. note 3. the term "storage" refers to products stored for a long period prior to mounting and use. the operating temperature and humidity range covers the non-conducting condition of installed connectors in storage, shipment or during transportation after board mounting. note 4. information contained in this catalog represents general requirements for this series. contact us for the drawings and specifcations for a specifc part number shown. materials part material finish remarks insulator lcp color:gray ul94v-0 color:black contacts phosphor bronze gold plated --------- pure tin refow plated metal fttings brass ordering information fh 41 ? 50s ? 0.5 sh ( 05 ) ? ? ? ? ? ? ? sh : smt horizontal mounting type ? plating specifcations :(05)gold plated ? series name : fh ? series no.: 41 ? number of positions : 28 to 68 ? contact pitch : 0.5mm t h e p r o d u c t i n f o r m a t i o n i n t h i s c a t a l o g i s f o r r e f e r e n c e o n l y . p l e a s e r e q u e s t t h e e n g i n e e r i n g d r a w i n g f o r t h e m o s t c u r r e n t a n d a c c u r a t e d e s i g n i n f o r m a t i o n .
3 fh41 series 0.5mm pitch, 2.5mm above the board,high speed transmission connector for shielded ffc connector dimensions (5.45) g (5.05) (0.12) (0.12) 1 e d c (0.15) 2.5 dimension for ffc opening) no. of contacts cavity no. 6.2 2.5 0.8 0.25 2 (4.7) unit : mm part number cl no. number of contacts no. of contacts(gnd contacts) c d e f g fh41-28s-0.5sh(05) 580-2208-1-05 28 5 18 13.5 10 14.57 15.95 fh41-40s-0.5sh(05) 580-2205-3-05 40 8 24 19.5 17.5 20.57 21.95 fh41-50s-0.5sh(05) 580-2204-0-05 50 10 29 24.5 22.5 25.57 26.95 fh41-68s-0.5sh(05) 580-2202-5-05 68 13 38 33.5 30 34.57 35.95 note1.tape and reel packaging (2,500 pieces/reel). order by number of reels. note 1. the coplanarity of each terminal lead within specifed dimension is 0.1 mm max. 2. packaged on tape and reel only. check packaging specifcation. 3. slight variations in color of the plastic compounds do not affect form, ft or function of the connector. 4. after refow, the terminal plating may change color, however this does not represent a quality issue. t h e p r o d u c t i n f o r m a t i o n i n t h i s c a t a l o g i s f o r r e f e r e n c e o n l y . p l e a s e r e q u e s t t h e e n g i n e e r i n g d r a w i n g f o r t h e m o s t c u r r e n t a n d a c c u r a t e d e s i g n i n f o r m a t i o n .
4 fh41 series 0.5mm pitch, 2.5mm above the board,high speed transmission connector for shielded ffc recommended pcb mounting pattern and metal mask dimensions recommended ffc dimensions 1 0.05 0.5 0.05 2.5 0.05 0.30.03 (land pattern) 0.3 0.03 (land pattern) 0.4 0.03 e 0.05 d 0.05 h 0.05 6.60.1 0.650.05 1.20.05 (land pattern) 1.550.05 6.350.05 0.2 0.0 ( . f u b m n b t l ) 10.05( . f u b m n b t l ) 0.25 0.03 ( . f u b m n b t l ) recommended metal mask thickness t=0.1 please overlap shield plate on ground plate. note shield area ground plate 17.7max 0.50.05 0.30.05 5.5min 3.80.1 2.60.1 1.90.1 5.5min 0.1min 2.70.5 2.20.5 0.50.1 0.50.05 0.30.03 j0.1 k0.07 d0.05 2-r0.2max 2-r0.2max 2-r0.2 2-r0.2 1 unit : mm part number cl no. number of contacts no. of contacts(gnd contacts) h j k fh41-28s-0.5sh(05) 580-2208-1-05 28 5 16 15.7 14.5 fh41-40s-0.5sh(05) 580-2205-3-05 40 8 22 21.7 20.5 fh41-50s-0.5sh(05) 580-2204-0-05 50 10 27 26.7 25.5 fh41-68s-0.5sh(05) 580-2202-5-05 68 13 36 35.7 34.5 note1.tape and reel packaging (2,500 pieces/reel). order by number of reels. t h e p r o d u c t i n f o r m a t i o n i n t h i s c a t a l o g i s f o r r e f e r e n c e o n l y . p l e a s e r e q u e s t t h e e n g i n e e r i n g d r a w i n g f o r t h e m o s t c u r r e n t a n d a c c u r a t e d e s i g n i n f o r m a t i o n .
5 fh41 series 0.5mm pitch, 2.5mm above the board,high speed transmission connector for shielded ffc recommended ffc construction note 1 please overlap shield plate on ground plate. material name material thickness(m) thickness(m) shielding material conouctiye adhesive polyester type copper film (tin plated) 70 adhesive acrylic type 24 base material polyester type 12 adhesive acrylic type 24 insulated layer polyester type adhesive polyester type soft copper film (nickel under plated / gold plated) 35 35 adhesive polyester type 35 35 insulated layer polyester type 25 25 adhesive polyester type 30 30 siiffener polyester type 188 188 total 503 313 1 1 1 1 t h e p r o d u c t i n f o r m a t i o n i n t h i s c a t a l o g i s f o r r e f e r e n c e o n l y . p l e a s e r e q u e s t t h e e n g i n e e r i n g d r a w i n g f o r t h e m o s t c u r r e n t a n d a c c u r a t e d e s i g n i n f o r m a t i o n .
6 fh41 series 0.5mm pitch, 2.5mm above the board,high speed transmission connector for shielded ffc embossed carrier tape dimensions packaging specification reel dimensions ! ! (tape width of 32mm min.) (tape width of 24mm max.) direction of unreeling direction of unreeling (q) (1.64:vacum pick up area) (p) 40.1 20.1 120.1 (0.3) (2.9) (r) l0.3 m0.1 1.750.1 (7.35) (5.75) n0.1 (5.75) (7.35) 1.750.1 l0.3 (r) (2.9) (0.3) 120.1 20.1 40.1 (p) (1.64:vacum pick up area) (q) n0.1 11.5 y0 0.1 11.5 y0 0.1 trailer portion equipped with connectors embossed carrier tape leader (400mm min) top cover tape 10 empty component compartments min 14 empty component compartments min (?13) (?80) (?380) (s:outside) (t: inside) unit : mm part number cl no. number of contacts no. of contacts(gnd contacts) l m n p q r s t fh41-28s-0.5sh(05) 580-2208-1-05 28 5 32 28.4 14.2 18.3 17 15.7 37.4 33.4 fh41-40s-0.5sh(05) 580-2205-3-05 40 8 44 40.4 20.2 24.3 23 21.7 49.4 45.4 fh41-50s-0.5sh(05) 580-2204-0-05 50 10 44 40.4 20.2 29.3 28 26.7 49.4 45.4 fh41-68s-0.5sh(05) 580-2202-5-05 68 13 56 52.4 26.2 38.3 37 35.7 61.4 57.4 t h e p r o d u c t i n f o r m a t i o n i n t h i s c a t a l o g i s f o r r e f e r e n c e o n l y . p l e a s e r e q u e s t t h e e n g i n e e r i n g d r a w i n g f o r t h e m o s t c u r r e n t a n d a c c u r a t e d e s i g n i n f o r m a t i o n .
7 fh41 series 0.5mm pitch, 2.5mm above the board,high speed transmission connector for shielded ffc temperature profile hrs test condition solder method :refow, ir/hot air environment :room air solder composition :paste, 96.5%sn/3.0%ag/0.5%cu (senju metal industry, co., ltd.'s part number:m705-221cm5-32-10.5) test board :glass epoxy 30mm60mm0.8mm thick land dimensions :0.3mm0.65mm, 0.3mm1.2mm metal mask :0.250.65, 0.20.1mm thick the temperature profles shown are based on the above conditions. in individual applications the actual temperature may vary, depending on solder paste type, volume / thickness and board size / thickness. consult your solder paste and equipment manufacturer for specifc recommendations. . " 9 ? start time(seconds) ? 60sec. 60sec. 90~120sec. preheating soldering ? ? ? temperature (?) t h e p r o d u c t i n f o r m a t i o n i n t h i s c a t a l o g i s f o r r e f e r e n c e o n l y . p l e a s e r e q u e s t t h e e n g i n e e r i n g d r a w i n g f o r t h e m o s t c u r r e n t a n d a c c u r a t e d e s i g n i n f o r m a t i o n .
8 fh41 series 0.5mm pitch, 2.5mm above the board,high speed transmission connector for shielded ffc operation precautions 1. ffc insertion procedure. connector installed on the board. ? lift up the actuator. use thumb or index finger ? do not force the actuator to open beyond its fully open position. do not use any type of tool to open the actuator. ? fully insert the ffc in the connector parallel to mounting surface, with the exposed conductive traces facing down. ? do not forcefully bend the ffc upward. consult ffc manufacturer for the recommended bend radiuses. ? rotate down the actuator until firmly closed. it is critical that the inserted ffc is not moved and remains fully inserted. ? for connectors with multiple contacts, such as 80 pos. rotate down the actuator pushing at both ends. 2.ffc removal fully open the actuator. carefully withdraw the ffc exercising caution not to deform or damage it. ? load to ffc be very careful not to apply any force to the connector directly after inserting ffc. otherwise, the connector may become unlocked or the ffc may break. in particular, design the ffc layout with care not to bend it sharply upward in a vertial direction near the insertion opening. fix the ffc when loads are applied to it continuously. operation and precautions 110 t h e p r o d u c t i n f o r m a t i o n i n t h i s c a t a l o g i s f o r r e f e r e n c e o n l y . p l e a s e r e q u e s t t h e e n g i n e e r i n g d r a w i n g f o r t h e m o s t c u r r e n t a n d a c c u r a t e d e s i g n i n f o r m a t i o n .
insert the cable straight and obliquely from above. slightlypullthecable tomakesurethetabs arefrmlysecured. close theactuator. ride on a left guide ride on a right guide correct insertion do not close the actuator as the cables ride on. do not move the cables back and forth and around as the cables ride on the guide when the actuator is closed. 9 fh41 series 0.5mm pitch, 2.5mm above the board,high speed transmission connector for shielded ffc operation precautions 1. how to insert insert the cable into the interspace between the mold walls ( ) at both ends of entrance where the connector is inserted and the guide walls ( ) at both ends of interior connector so the cable tabs are properly located. ? avoid ride on avoid insertion so the cables ride on any guide. be sure not to close the actuator as the cables ride on any guide. it may cause conduction failure. 2. precautions when mating /un-mating ? avoid insertion in diagonal direction. do not insert the cable in diagonal direction. a part of the connector may touches the contacts resulting in deformation of the contacts. insert the cable straight into the connector and hook the cable tabs with the guide. after insertion, slightly pull the cables to make sure the cable tabs are frmly secured. no removal of the cable means correct insertion. in the event it is locked as the cables ride on a guide, absolutely avoid moving the cable. in this case, open the actuator and re-insert the cable as instructed in 1.how to insert precautions (mating/un-mating ffc with the retention tabs) t h e p r o d u c t i n f o r m a t i o n i n t h i s c a t a l o g i s f o r r e f e r e n c e o n l y . p l e a s e r e q u e s t t h e e n g i n e e r i n g d r a w i n g f o r t h e m o s t c u r r e n t a n d a c c u r a t e d e s i g n i n f o r m a t i o n .
|
